Contemporary Stacking Necklace
Learn how to make this Contemporary Stacking Necklace with an awesome tutorial from Nunn Designs. With clear instructions, bright step-by-step photos, you will easily be able to recreate this DIY necklace tutorial in no time at all. It is actually quite simple to craft this necklace and we are sure you will absolutely love this design. It is chic, modern, yet very simple all at the same time. This is a fantastic accent piece to your wardrobe and this metallic necklace would work well any time of the year. Be sure to add this beautiful accessory to your wardrobe!
Bead TypeMetal
Time to CompleteIn an evening
Bead Technique UsedMetalwork
Bead Project TypeNecklace
Materials List
- 2 Wire Frame Open Circle Large Double Hole - Antique Gold
- 1 Wire Frame Open Circle Large Double Hole - Antique Copper
- 1 Metal Bead Faceted Elongated Drop - Antique Copper
- 1 Jumpring 9mm Textured Circle - Antique Copper
- 1 Toggle Ring Small Hammered - Antique Copper
- 1 Toggle Bar Small Hammered - Antique Copper
- 10 Jumprings Small - Antique Gold
-
16” Small Hammered Flat Cable Chain - Antique Copper
- Tools Needed: 2 Pair Needle Nose Pliers
Learn How
-
Using both pair of Needle Nose Pliers, attach Small Jump Rings onto all 3 of the Open Circle Large Wire Frames – you will need a total of 6 jump rings for this step, 2 for each frame.
-
Reopen one of the attached jump rings on one of the antique gold Large Open Circle Wire Frames. Attach one end of the 16” Small Hammered Flat Cable Chain to the jump ring and close. Repeat for the other side.
-
Lay the antique copper Large Open Circle Wire Frame on top of the antique gold Large Open Circle Wire Frame. Connect the two Large Open Circle Wire Frames with a jump ring.
-
Lay the antique gold Large Open Circle Wire Frame onto the other two. Connect with a jump ring on both sides.
-
Find the center of the 16” Small Hammered Flat Cable Chain. Using two pair Needle Nose Pliers open up one of the chain links and attach the Small Hammered Toggle Bar. Repeat for the other side, attaching the Small Hammered Toggle Ring.
-
Using both pair of Needle Nose Pliers, open the 9mm Antique Copper Textured Circle Jumpring and thread on the Metal Bead Faceted Elongated Drop. Attach to the bottom Large Open Circle Wire Frame. Close the 9mm jump ring.
-
Wear this beauty all over town!
What is your favorite type of jewelry: Classic, Delicates or Statement Pieces?