Cactus Shrublands

Rocks

1. Start with a couple jagged half-circle shapes in a line.

2. Add a small pebble or two underneath the rocks.
   
   Draw the ground they’re resting on with a few horizontal strokes. For a half-buried look, have one small line across the bottom with a few diagonal strokes on each side.

3. Add jagged diagonal strokes across the center of your rocks.

4. Shade your rocks with diagonal dashes on the bottom and along the opposite side of your light source (in this example, the sun is at the top right).

Yucca

1. Start with three thin, pointy leaves coming out around a single point in the ground.
   
   Mirror those leaves in the opposite direction for three leaves growing along the ground.

2. Draw more leaves sticking out sideways between the others.

3. Then begin a stalk with a thin vertical stroke from the center of your central plant and a few tiny spikes on the sides.
   
   Continue to layer these thin pointy leaves all around your central plant, letting them overlap naturally.

4. Around the top of the stalk, draw some veiny diagonal branches with smaller branches coming off them.

5. Add a few more thin branches to connect your petals.
   
   Add loose petal shapes around these branches, letting some blow away with the wind; don’t be afraid of making these too specific, because the more random they are the more natural it looks! For a further breakdown of these petals, start with an oval-like shape, draw a center line and layer curvy wavy petals around them. Add a few more thin branches to connect your petals.

Bunch Cactus

1. Start with some layers of narrow upside-down U shapes along a horizontal area on the ground. These can be extra straight and round, or narrower and swooping.
   
   Layer some between the ones in the front.

2. You can also cap off the bottoms of each U shape.
   
   To add spikes, draw tiny dashes coming out around the U shapes.

3. For central spikes on the cactus, add small dots coming down the center of each cactus in imaginary lines that begin around the top point.
   
   For another way to indicate spikes, just draw some thin vertical lines coming down each cactus.

Agave Plant

1. Start with an extra spiky shape that arches out around the ground with a central spike taller than the others.

2. Create an overlap in the middle with a Y shape. Connect the front spikes to the Y shape by continuing their diagonal lines to the center.

3. Layer more spiky shapes in between the others.
   
   Add central lines down each of the spikes.

4. For the spines, draw small bumpy ripples along one line of each spike. This can be in the middle or along their sides.
   
   Cap off the bottom shape with some rounded lines.

Saguaro

1. Make two long, narrow upside-down U shapes that don’t have to be completely symmetrical, leaving some gaps in the shapes for branches later on.

2. Add some cactus arms with curving upside-down Us coming from the gaps or add a small circle for a hole within the cactus.
   
   Draw jagged lines along the bottom of the cacti.

3. Add cacti ridges with vertical strokes following their natural shape.
   
   Continue the vertical trunk of your cactus by drawing a jagged bottom and adding organic bumps. From the bumps, add horizontal dashes inward and vertical dashes underneath to add texture.

4. Create a faraway cactus with a darkened trunk and curving arms that connect to it.
   
   Add a few small rocks along the bottom of your cacti and draw little upward dashes for some grasses and horizontal dashes for the ground.

Prickly Pear

1. Start with three round, upside-down U shapes bunched together.

2. Layer more U shapes on the tops and sides of your initial bunch and build these upwards and slightly outwards in various shapes and sizes.
   
   Make the upper prickly pear layers slightly smaller than the initial ones to indicate they are new growth.
   
   Make cactus buds with tiny U shapes along a few of your prickly pear edges.
    

3. For spines, simply add dots randomly throughout your prickly pears, making some slightly bigger or smaller. Draw spikes sticking out with some thin dashes around the outline of your cactus.
   
   Add a few flat prickly pear “paddles” that have fallen off around the bottom of your cactus.

Barrel Cactus

1. Make a large, fat upside-down U shape, making the bottom slightly narrower than the rounded bump on top.
   
   Add half of an upside-down U to the side and a small squat one in the front.

2. To add the ridges of your cactus, start from an imaginary point on the top and draw lines down following the natural curves of the cactus shape.
   
   Add rounded caps to the bottom of each shape.

3. Add spines along these ridges by drawing tiny Vs evenly spaced apart on the lines. Have them face towards the left side of the cactus on the left side, and towards the right on the right side.

Now, Let’s Draw the Scene

1. Begin the foreground with an Agave Plant and a Bunch Cactus. Layer the bottom right corner with another cactus and a Prickly Pear.

2. Continue to layer behind your plants with more cacti, prickly pears and some big Barrel Cacti. Add some Saguaro slightly farther in the distance and be sure to leave some space around the center of the frame. Add a few rock shapes throughout.

3. Start to develop a sandy trail through the shrubland with small horizontal dashes following an imaginary curving line that gets smaller heading towards the horizon. Add more succulents and some small Rocks along the trail as well.

4. As you continue building your shrubland around your trail with more of the same plants, add a hill shape on the right side of the frame.

5. Draw distant mountains with some wobbly horizontal lines across the background. Feel free to experiment with different sizes of peaks and valleys! Add details to your closest desert hills by drawing sloping lines with shrubs or rocks on top. Making the slopes follow the outline of the hill will help to add realistic texture, and some thin diagonal lines on other mountains will help to create steep cliff sides.

6. Follow up with an extensive cactus field by drawing saguaros on the mountains in the fore- ground, making them smaller and less detailed until they are tiny vague shapes dotted throughout the mountains in the background. Add depth to your tallest peak by shading the left mountain face with vertical lines.
   
   Draw magnificent clouds by starting with a straight horizontal bottom then adding a puffy, wiggly shape above. Adding a few more puffy squiggles to the middle of the cloud gives it more shape. Create a truly endless desert sky by drawing much smaller clouds closer to the mountainous horizon!

Credit Line: