Sweet Dreams Bedroom

Instructions

1. The Bedroom measures 7 1/2″ wide, 7 1/2″ tall and 5 1/2″ deep. Cut 3 pieces of chipboard 5 3/4" x 7 1/2". Cut 1 piece of chipboard 7 1/2" x 7 1/2" to use as the back wall.

2. Cut decorative scrapbook paper from the Garden Goddess paper pad to use on the floor, walls and outside walls of the room. I like to cut my paper slightly wider than I need so I can trim the edges with a craft knife.

3. I used both cardstock and scrapbook paper to cover my walls. For my walls...cut both papers into 3 3/4″ strips.

4. I cut a small strip of paper from the paper pad for a decorative border.

5. I ran each of my strips through the Xyron Creative Station.

6. Adhere paper to the chipboard.

7. Cover back of the chipboard with coordinating scrapbook paper.

8. Gently sand edges with a extra fine sanding block for the perfect edge

9. For the Mural on the Wall... I used an SVG file and my Silhouette Cameo Wireless Cutting Machine to cut and create the words “follow your dreams” using StyleTechCraft Dark Red Ultra Metallic Glitter Vinyl.

10. Using the weeding tool, I carefully removed the negative spaces in and around the letters.

11. Place a piece of Vinyl Transfer Tape* over the letters.

12. Apply words onto the back wall. Remove transfer tape.

13. Glue the walls together using a good craft glue . I like to use Beacon's 3-in1 craft glue. I used wood boxes to hold my wall up while the glue dried.

14. I added small strips of paper on the back corners for added support.

15. I purchased inexpensive unfinished doll furniture at the Dollar Store and painted it with White Birch Multi Surface Acrylic Paint. Accent the edges of the furniture and knobs on the dresser with the silver leafing pen. I made a small little toybox out of chipboard and painted it. I added pearl beads to the bottom of the toybox and bed.

16. Using StyleTechCraft Dark Red Ultra Metallic Glitter Vinyl and my Silhouette Cameo I cut the words "toys" and the name "Annie". Apply the vinyl onto the toybox and bed the same as the wall.

17. To make a mini lamp shade...punch a 3" scallop circle. Trace around a button in the center of the scalloped circle. Cut out the small circle as shown in the picture. Glue ends of the circle together to form shade. Glue shade onto a small painted wood spool.

18. Cut small pieces of ribbon and glue them onto a piece of twine to create a small ribbon banner to hang onto the wall. Glue Banner onto back wall.

19. The mirror was made using a small piece of StyleTechCraft Chrome Metallic Vinyl placed onto a small piece of chipboard.

20. Cut 1/4" strips of chipboard and paint brown. To create a wood look, ink to the edges of the chipboard with vintage photo distress ink. Glue strips onto the front of the Chrome Metallic Vinyl to create the frame. FYI...I used small Christmas ornaments for the toys.