Midnight Sky Necklace

Great for day and night, this Midnight Sky Necklace is just the thing to help you take a simple outfit and transform it into something classic and beautiful. Made with lovely beads and memory wire, this simple DIY necklace pattern is great for crafters of all ages and skill levels, and is easy to mix and match with your favorite go-to outfit.

Materials:

Three dichoric round beads
Eight silver 1.7mm tube cord ends
Eight silver split rings
One silver tag
One lobster clasp
One coil necklace memory wire 1ft 1.7mm black rubber tubing
36" 20 gauge Colourcraft wire, Black
Deluxe Thing-A-Ma-Jig
Round Nose Pliers
Nipper Tool
Memory Wire Shear
Pasco Fix

Instructions:

Slip the black rubber tubing onto the entire coil of memory wire. The coil should be completely covered by the tubing. Cut off any excess tubing with the Nipper Tool.
Cut 4 pieces of the covered memory wire using the Memory Wire Shear into approximately 2” lengths.
Glue a tube cord end using the Pasco Fix glue onto each end of the covered memory wire. Set aside.
To make the Colourcraft wire designs, cut the wire into three 12” lengths.
Using the deluxe thing-a-ma-jig, take each cut length of Colourcraft wire and use the following pattern. Make sure to slide on the bead in the middle of the design.
Use the round nose pliers to make loops on the end of the design and wrap any excess wire around the stem of the loop.
Attach the Colourcraft design to the covered memory wire pieces using split rings.
For attaching the tag and the lobster clasp, attach to the ends of the covered memory wire using split rings as well.