Decorative Stenciled Art Boot

Materials:

• 1 The Crafter's Workshop TCW384 Stencil
• 1 The Crafter's Workshop TCW268 Stencil
• 1 The Crafter's Workshop TCW219 Stencil
• 1 The Crafter's Workshop TCW437 Stencil
• 1 The Crafter's Workshop TCW108 Stencil
• 1 The Crafter's Workshop TCW324S Stencil
• 1 The Crafter's Workshop TCW454S Stencil
• 1 Roll of masking tape
• 1  Old rubber boot
• 1 Can each of Krylon® ColorMaster Primer in Pewter Gray, White, Ivory, Banner Red, Gloss Black, Peekaboo Blue, Sun Yellow, and Island Splash

Time to Complete: 2 hours (does not include drying time)

Instructions:

1. Clean rubber boot.
2. Spray entire outside of boot with 2-3 fine coats of Krylon ColorMaster Primer in gray.
3. Spray random patterns of Krylon ColorMaster colors through selected stencils varying positions around boot. Allow 1 minute to dry between layers.
4. Use Krylon ColorMaster colors in white and ivory to spray fine coats between stenciled areas. It's OK to cover stenciled area with a fine mist of ivory and white. This helps to set the stencil into the project.
5. Repeat steps #3 & #4 until satisfied with overall design.